Advice on patching Grandmother to 0-coast

[SynthWizard]

0			0

Advice on patching Grandmother to 0-coast

<!-- SC_OFF --><div class="md"><p>I’m just getting started with patching between the GM and 0-coast. </p> <p>For some reason the GM Gate out is not working to trigger the 0-coast slope (I’ve patched the 0-coast as a third oscillator using GM noise In, and am now trying to use the 0-c Slope to create a pitch envelope for both 0-coast and GM oscillators).</p> <p>I’ve tried with both stackable cables and regular cables. The slope works to create a pitch envelope when I have the slope set to cycle (or if I use the 0-coast clock to trigger it), but I can’t get it to trigger from the GM keyboard. </p> <p>If I unplug the cable between the GM/0-coast slope, and plug it in again, I do get one successful pitch envelope, but it doesn’t repeat with subsequent GM key presses. The orange EOC slope light just gets stuck ‘on’.</p> <p>(The GM Gate output works fine with the 0-c contour, and also the GM KB out is working to control the 0-coast pitch, so I know it’s generally communicating!)</p> <p>Any idea what could be causing this? I was expecting the GM Gate out to work as a trigger for the slope. Is there something else I’m missing - should this be working?</p> <p>EDIT: I found a workaround by patching the GM Gate Out —&gt; 0-c Tempo In, and then 0-c Clock Out —&gt; 0-c Slope Trigger In. Finally they’re talking to each other!</p> </div><!-- SC_ON --> submitted by <a href="https://www.reddit.com/user/preparedtoB"> /u/preparedtoB </a> <br/> <span><a href="https://www.reddit.com/r/modular/comments/wc8plm/advice_on_patching_grandmother_to_0coast/">[link]</a></span> <span><a href="https://www.reddit.com/r/modular/comments/wc8plm/advice_on_patching_grandmother_to_0coast/">[comments]</a></span>